BudgetHandles.com.au

Balmoral Offset Long Entrance Handles

Wolf — Thu, 02 Sep 2010 23:51:53 +0000

Hover to magnify, click to enlarge.	$193.5 You save 10%
Click or scroll down for the product description. Please Choose: Roller Mortice Lock Kit: Not Required Required ( +$80.5 )	Add to Cart:

Product Description and Specifications

The architectural Balmoral series of long entrance handles are the most popular entrance handles we sell, these change any entrance door into an truly impressive door and they are manufactured from 304, commercial grade stainless steel.
This is the offset version of the Balmoral stainless steel pull handle. The offset (bend) of the handle allows it to be installed directly onto the frame of aluminum doors or closer to the edge of a timber entrance door to avoid that someone's hand gets hurt when pushing the door open and it also allows you to install the locking hardware in front of the handle if you wish.

These are Back To Back (BTB) handle sets that is two handles, one for the inside and one on the outside of your door and they come complete with all fixing accessories for installation on either timber, glass or aluminium doors. Please refer to the chart below for sizes and pricing. The brushed finish of the handle matches all our other door hardware allowing you to mix and match. For your convenience you can also add a roller mortice lock kit, please see below for more details.

Finish: Brushed stainless steel

Sizes and Pricing:

Length	C/C	Projection	Grip Height	Diameter	Price	Intro Special
600mm	450mm	80mm	48mm	32mm	$215.00	$193.50

Please choose at the top of this page if you want a roller mortice lock with your handle and then click "Add to Cart".

Glossary of terms used above:

C/C:	centre to centre measurement of screw holes
Length:	overall length of handle
Projection:	distance from door to top of handle
Grip Height:	gap between door to bottom of handle
Diameter:	width of handle tube

Hole size to drill for glass doors is 12mm and for timber doors 9mm.

Roller Mortice Lock:
A roller mortice lock has a roller latch instead of a tongue latch which means you won't require a lever or knob to open and close the door. In an unlocked state you open the door by pulling on the Balmoral handle and close the door by pushing on the handle - the latch will "snap" in and out. Because you don't need a lever/knob your entrance door will have a more streamlined look. Another important feature of our roller mortice lock is that the roller keepers (strike plate) are angled so that the door will not rattle in the wind.

The roller mortice lock has a brushed stainless steel finish and includes:

roller mortice lock itself with regular backset of 57mm
a 5pin euro lock cylinder with a snib on the inside and keyed on the outside and
two stainless steel escutcheons to fit the euro cylinder (as per pic).

Click to return to top and to see the "Add to Cart" button.

Related posts brought to you by Yet Another Related Posts Plugin.

Arundel Series

Wolf — Thu, 02 Sep 2010 03:14:24 +0000

Hover to magnify, click to enlarge.	$49.95 You save 39%
Click or scroll down for the product description. Please Choose: Roller Mortice Lock Kit: Not Required Required ( +$80.5 )	Add to Cart:

Product Description and Specifications

Our supplier has made us a special offer if we buy bulk and we did and we're passing the saving on to you. This price is for only for as long as special stocks last. SO if you like this handle then buy it now.
The Arundel is manufactured from 304 grade stainless steel tube. The offset (bend) of the handle allows it to be installed directly onto the frame of aluminum doors or closer to the edge of a timber front door to avoid that someone's hand gets hurt when pushing the door open. It is a Back to Back (BTB) Handle set that is one handle on the inside and one on the outside. It comes complete with all fixing accessories required for timber, glass or aluminum door installation. You can also choose to add an roller mortice lock, see below for more details. Please refer to the chart below for sizes and pricing. The brushed finish of the handle matches all of our other door hardware allowing you to mix and match as you see fit.

Finish: Brushed Stainless Steel

Specifications:

Length	C/C	Projection	Grip Height	Tube
332mm	300mm	70mm	38mm	32mm

To see prices and to choose the handle length you want please scroll to the end of this page.
Glossary of terms used above:

C/C:	The centre to centre measurement of the screw holes
Length:	The overall length of the handle
Projection:	Distance from door to top of handle
Grip Height:	Gap between door to bottom of handle
Tube:	The size of the stainless steel handle tube

Roller Mortice Lock Set Information

A Roller Mortice Lock (RMS) has a roller instead of a regular latch. This means you do not require a lever or knob to open the door. In an unlocked state you open the door by pulling on the long entrance handle and push to close the door and the latch will "snap" in and out. Because you don't need a lever/knobset the look of your entrance door is not spoilt. Another important feature of our roller mortice lock is that the roller keepers (strike plate) are angled so that the door will not rattle in the wind.
This kit includes in matching brushed stainless steel finish:

A roller mortice lock with regular backset of 57mm as pictured to the right.
A 5pin Euro lock cylinder (refer to pic) and
two stainless steel escutcheons to fit the euro cylinder (refer to pic).

Click to return to top and to see the "Add to Cart" button.

Related posts brought to you by Yet Another Related Posts Plugin.

Large Owner Builder Order

Wolf — Wed, 01 Sep 2010 21:55:23 +0000

Hi Wolf, Received our order today. Thanks for the great service, Regards, Lucas & Katie. Related posts:Owner Builder Discount I know from experience that when your building your home... Order is correct Dear Wolf, I’ve received my order last Thursday. The order... Referred to friends Good morning, Thank you so much. I have referred you... [...] Related posts:

Owner Builder Discount I know from experience that when your building your home...
Order is correct Dear Wolf, I’ve received my order last Thursday. The order...
Referred to friends Good morning, Thank you so much. I have referred you...

Related posts brought to you by Yet Another Related Posts Plugin.

Missing Wave Dummy

Wolf — Tue, 31 Aug 2010 21:53:11 +0000

Customers email:

Hello
Thanks very much for dispatching the order to us. We have been very
impressed with your service thus far, however on the weekend we were going
through our order in the box and discovered we were missing a dummy door
handle. We hope that you are able to review your picking order and stock
levels to check the error.
We look forward to hearing from you regarding this matter. Apart from that,
your service has been excellent.
Many thanks

Kate and Wayne

My response:

Hi again
Sorry, about that, it does a bit hectic in the warehouse sometimes and one dummy must have been missed, we will dispatch 1x Wave-DUM to you today.
Regards

Wolf

Wave Classic Modern Doors Handles Move your mouse over image or click to enlarge Hover...
Unhappy Customer Hi, I received my handles today , thank you. I...
$70 less then Bunnings Received order today. Thank you so much for an excellent...

Related posts brought to you by Yet Another Related Posts Plugin.

CupHandle Cup Door or Cabinet Handle

Wolf — Sun, 29 Aug 2010 23:34:05 +0000

Hover to magnify, click to enlarge.	Price: $14.75
Click or scroll down for the product description.	Add to Cart:

Product Description and Specifications

This cup door handle pull is made from stainless steel with a brushed stainless steel finish. It has 2 holes for affixing and 25mm long screws for affixing are included as well as a 52mm long spindle that can be used to drive 7.6 or 8mm square latches. The handle in the cup can be lifted up and turned to retract the latch.
This is ideal for situations where you want to latch a door where there is not enough space for a regular door handle, in this case you can use this together with out TL60 latch and install a FH02 on one or both sides of the door. Applications are Wardrobe doors, timber screen doors etc.

However you can also use it as an cabinet handle, just be aware that you will need to rebate a 20mm x 7mm deep hole in the centre to accommodate the spindle drive.

Measurements:

Projection: 15mm
Diameter: 74mm
Hole required in centre to accommodate spindle drive: 20mm
Spindle: 52mm long and 7.6mm square

Click to return to top and to see the "Add to Cart" button.

Related posts brought to you by Yet Another Related Posts Plugin.

Cannot believe how good the service is!

Wolf — Thu, 26 Aug 2010 01:00:22 +0000

Cannot believe how good the service is!

Ordered my handles to go Ingleburn yesterday at 10 am and delivered from Dungog before 10 today! I don’t think I could drive there in that time.

Thanks for your superb service.

I will certainly be ordering again AND telling my friends.

Regards,

Priit P., INGLEBURN, NSW 2565 Australia

Thank you for my kitchen handles Just a quick email to thank you for my kitchen...
Fitted handles they look teriffic Just want to thank you for the excellent service in...
I’ll recommend your company Thanks so much. I really appreciate your proactive approach in...

Related posts brought to you by Yet Another Related Posts Plugin.

Omega Passage SS

Wolf — Thu, 26 Aug 2010 00:51:17 +0000

Click image to enlarge.	Price: $26.35
Click or scroll down for the product description.	Add to Cart:

Product Description and Specifications

These are high quality lever sets that are ideal for price sensitive projects. Strong spring makes this lever feel good in the hand.
Features & Hole sizes

Adjustable 60/70mm Backset
Rose diametre: 66mm
KA2 (Keyed alike in pairs) as standard for keyed Entance sets
C4 5 pin Cylinder in entrance function
Holes to drill are: for handle spindle 54mm, for latch 25mm and strike 22mm
Length of lever is 132mm

Finish: Brushed Stainless Steel and Polished Brass

Functions Available:

Function	Usage	Handing	Projection
Passage	hallways, bed rooms, living rooms	set yourself as required	62mm
Privacy	Bath rooms, toilets etc, bed rooms	set yourself as required	67mm
Keyed	Entrance, Store rooms, office doors	order Left/Right below	67mm
Dummy	single lever for wardrobe or linen cupboard doors	choose Left / Right below	62mm
Combination	This is a entrance set and a double cylinder deadbolt keyed alike	choose Left / Right below	67mm

When installing you can set handing for Passage and Privacy by means of grub screw. For the entrance, combination and dummy levers please indicate below the required handing.

Handing Guide (for entrance, combination and dummy handles):
Stand on the side of the door where you can see the knuckle (back) of the door hinges. If they are on the:

left -> left handed door
right -> right handed door

Click to return to top and to see the "Add to Cart" button.

Change Handing of Omega Privacy & Passage Sets The Omega Passage and Privacy leverset can be changed on...
HPK Half Passage Kit for Premium Dummy Levers ...
Difference between Passage and Privacy? Cathy asked this today: Hi, Can you explain the difference...

Related posts brought to you by Yet Another Related Posts Plugin.

9013 Cabinet Handle C/C 64mm x15

Wolf — Thu, 19 Aug 2010 05:46:17 +0000

Click to return to top and to see the "Add to Cart" button.

Related posts brought to you by Yet Another Related Posts Plugin.

FH197 D-Pull Handle with 4-hole Visible Fixing

Wolf — Thu, 19 Aug 2010 02:49:23 +0000

Click image to enlarge.	Price: $5.15
Click or scroll down for the product description.	Add to Cart:

Product Description and Specifications

This handle is ideal for screen doors where you want to have a handle on each side and also for drawers and cabinet doors where drilling through to fit screws from the inside is not feasible or not wanted.
This handle is supplied without screws.
Features:

Visible fixed via four countersunk screw holes
C/C is: 130mm
Length: 153mm
Grip Height: 27mm
Projection: 38mm
Width: 12mm
Solid diecast zinc construction

Finish: Chrome Plated

Glossary of terms used above:

C/C:	The centre to centre measurement of the screw holes
Length:	The overall length of the handle
Projection:	Distance from cupboard to top of handle
Grip Height:	Gap between cupboard to bottom of handle
Width:	The thickness of the handle grip

Click to return to top and to see the "Add to Cart" button.

Related posts brought to you by Yet Another Related Posts Plugin.

9013 Cabinet Handle C/C 96mm x12

Wolf — Wed, 18 Aug 2010 23:46:12 +0000

Click to return to top and to see the "Add to Cart" button.

Related posts brought to you by Yet Another Related Posts Plugin.

BudgetHandles.com.au

Balmoral Offset Long Entrance Handles

$193.5 You save 10%

Please Choose:

Roller Mortice Lock Kit:

Product Description and Specifications

Arundel Series

$49.95 You save 39%

Please Choose:

Roller Mortice Lock Kit:

Product Description and Specifications

Roller Mortice Lock Set Information

Large Owner Builder Order

Missing Wave Dummy

CupHandle Cup Door or Cabinet Handle

Price: $14.75

Product Description and Specifications

Cannot believe how good the service is!

Omega Passage SS

Price: $26.35

Product Description and Specifications

9013 Cabinet Handle C/C 64mm x15

Price: $30

Product Description and Specifications

FH197 D-Pull Handle with 4-hole Visible Fixing

Price: $5.15

Product Description and Specifications

9013 Cabinet Handle C/C 96mm x12

Price: $25

Product Description and Specifications