We have been able to do a deal on Balmoral handles and have purchased a bunch of theses in:
450, 600 and 800mm length
and we can offer these at a fantastic price for as long as stocks
last starting from a very, very low price of $82.50 for the
Balmoral-450.
The architectural Balmoral series of long entrance handles are the most popular entrance handles we sell, these change any entrance door into an truly impressive door and they are manufactured from 304, commercial grade stainless steel.
These are Back To Back (BTB) handle sets that is two handles, one for the inside and one on the outside of your door and they come complete with all fixing accessories for installation on either timber, glass or aluminium doors. Please refer to the chart below for sizes and pricing. The brushed finish of the handle matches all our other door hardware allowing you to mix and match. For your convenience you can also add a roller mortice lock kit, please see below for more details.
Finish: Brushed stainless steel
Sizes and Pricing:
Length
| C/C
| Projection | Grip Height | Diameter
| Price
| Special
|
|---|
450mm
| 300mm
| 70mm
| 45mm
| 25mm
| $115.00
| $82.50
|
600mm
| 450mm | 80mm | 48mm | 32mm | $135.00
| $99.00
|
600-316*
| 450mm
| 80mm
| 48mm
| 32mm
| $185.00
|
|
800mm
| 600mm
| 80mm
| 48mm
| 32mm
| $255.00
| $165.00
|
1200mm
| 800mm
| 80mm
| 48mm
| 32mm
| $295.00
|
|
1500mm
| 1000mm
| 80mm
| 48mm
| 32mm
| $395.00
|
|
* 600-316 is a 600mm long handle made from 316 (marine grade). Marine grade is only required if the handle will be installed on a boat or you live very close to the beach and you get salt spray onto your house.
Please choose at the top of this page the handle you require and if you want a roller mortice lock with your handle and then click "Add to Cart".
Glossary of terms used above:| C/C: | centre to centre measurement of screw holes |
| Length: | overall length of handle |
| Projection: | distance from door to top of handle |
| Grip Height: | gap between door to bottom of handle |
| Diameter: | width of handle tube |
Hole size to drill for glass doors is 12mm and for timber doors 9mm.
Roller Mortice Lock:
A roller mortice lock has a roller latch instead of a tongue latch which means you won't require a lever or knob to open and close the door. In an unlocked state you open the door by pulling on the Balmoral handle and close the door by pushing on the handle - the latch will "snap" in and out. Because you don't need a lever/knob your entrance door will have a more streamlined look. Another important feature of our roller mortice lock is that the roller keepers (strike plate) are angled so that the door will not rattle in the wind.
The roller mortice lock has a brushed stainless steel finish and includes:
- roller mortice lock itself with regular backset of 57mm
- a 5pin euro lock cylinder with a snib on the inside and keyed on the outside and
- two stainless steel escutcheons to fit the euro cylinder (as per pic).
|  |
